我的位置：
- 數字音視工程網/
- 產品中心/
- 產品詳情
硅天下科技-Wearable Charge Management Solution Ext-MAX14676, MAX14676A
The MAX14676/MAX14676A are battery-charge-management solutions ideal for low-power wearable applications.
地址：深圳市福田區紅荔路38號群星廣場大廈1807
電話：13724212401、0755-28772011(聯系就說在DAV音視工程網上看到的)
廠商介紹： 深圳市硅天下科技有限公司以研發監控系統方案為主業，硅天下科技為中國物聯網企業提供優良的萬物互聯、寬頻溫度傳感器、高精準壓力測試、物聯網智慧城市建設、車載專網通信、車載通信線路、智能家居、智能化系統、汽車電子配件、汽車360全景倒車、車載充電器、車載液晶屏、車聯網、車載DVR方案、高速寬頻數據采集卡等... [詳細]
| 經銷商 | 聯系方式 | 價格 |
|---|---|---|
| 硅天下科技 | 13724212401、0755-28772011 | 面議 |
MAX14676, MAX14676A
Wearable Charge Management Solution
Extend Battery Life of Wearable Electronics
數據資料訂閱尚在產。
點擊查看特定型號的庫存狀況。
概述
參數規格
設計資源
質量與環境
訂購
說明
The MAX14676/MAX14676A are battery-charge-management solutions ideal for low-power wearable applications. These devices include a linear battery-charger with a Smart Power Selector™, ModelGauge™ fuel gauge, and several power-optimized peripherals. They feature an ultra-low-power buck regulator with a quiescent current of 900nA (typical) and 74% efficiency with 10μA output.
The battery charger features Smart Power Selector operation, allowing operation with dead battery. It limits input current based on a register setting. If the charger power source is unable to supply the entire system load, the smart power control circuit will supplement the system load with current from the battery.
負責人：張超
手機:137 2421 2401 QQ：820270087 郵箱：820270087@qq.com
The MAX14676/MAX14676A embed a Maxim proprietary ModelGauge fuel gauge to provide an accurate estimate of the available capacity for rechargeable lithium batteries.
The MAX14676/MAX14676A include a synchronous high-efficiency step-down converter. The device features a fixed-frequency PWM mode for tighter regulation, and a burst mode for increased efficiency during light-load operation.
The MAX14676/MAX14676A have a boost regulator and three programmable current sinks that can be used to drive a variety of LED configurations. The boost converter is controlled independently from the current sinks, and they can be also used separately.
The MAX14676/MAX14676A feature a power switch controller that allows the device to be turned on and off by a pushbutton. This controller also provides a delayed reset signal and voltage sequencing.
These devices are available in a 42-bump, 0.5mm pitch, 3.497mm x 3.118mm wafer-level package (WLP).
關鍵特性
Extend System Use Time Between Battery Charging
1.8V Low-IQ 200mA Buck Regulator
0.9μA (typ) Quiescent Current
Automatic Burst or Forced-PWM Modes
ModelGauge with Accurate State-of-Charge
Easy-to-Implement Li+ Battery Charging
Smart Power Selector
28V Tolerant Input
Thermistor Monitor
Minimize Power-Management Footprint though High Integration
3.2V Low-IQ 100mA LDO
2.0V Always-On 50μA LDO
+5V Safe Output LDO
6.6V Low-IQ 120μA Charge Pump
Support a Wide Variety of Display Options
5V to 17V Output Boost Converter
3-Channel Adjustable High-Voltage Current Sinks
Optimize System Control
Pushbutton to Enable Ultra-Low-Power Mode and Power-On Voltage Sequencing
I2C Control
應用
健身監測器
null
便攜式醫療設備
可穿戴電子產品
相關資料
封裝信息
技術文檔
設計指南
