數字音視工程網

微信公眾號

手機DAV

熱門搜索：

技術風向標

null

null

null

null

null

null

我的位置：

用于光纖延長器的模塊化電源機箱-PowerCage 1600圖片

愛思創(chuàng )Extron電子-用于光纖延長器的模塊化電源機箱-PowerCage 1600

廠家報價：面議產品狀態：(在產)

用于光纖延長器的模塊化電源機箱 PowerCage 1600

產品品牌：愛思創(chuàng )EXTRON

產品類別：產品中心

地址：中國上海市松江區茸華路 686 號

電話：4000.398766、 021-3760 1568(聯系就說在DAV音視工程網上看到的)

咨詢 加入收藏我要評價

咨詢

所在單位:	*
姓名:	*
手機:	*
職位:
郵箱:	*
其他聯系方式:
咨詢內容:
驗證碼:	不能為空驗證碼錯誤

確定

愛思創(chuàng )電子（上海）有限公司_愛思創(chuàng )Extron中國

廠商介紹：愛思創(chuàng )電子（上海）有限公司（愛思創(chuàng )Extron中國）全球總部位于美國加州，是世界領先的專業視音頻系統集成產品的生產商。愛思創(chuàng )Extron產品主要包括視音頻控制系統、計算機視頻接口、切換器、矩陣切換器、分配放大器、音頻放大器、揚聲器、雙絞線和光纖設備、視頻圖像解析度轉換器、視音頻信號處理器、視音頻流媒... [詳細]

訪問企業子網

經銷商	聯系方式	價格
愛思創(chuàng )Extron電子	4000.398766、 021-3760 1568	面議

PowerCage? 1600 System

NOTE	The PowerCageFOXAEX104 board is not compatible with the Extron FOX3GHD-SDI extender or the FOX3GDVC signal converter.

NOTE	The PowerCage FOX DVI, PowerCage FOX VGA, PowerCage FOX HDMI, and PowerCage FOXSRHDMI boards are not compatible with the FOX3GHD-SDI, FOX3GDVC, or FOXAV models.

NOTE	The PowerCage FOX boards are available in singlemode or multimode versions.

NOTE	The PowerCage FOX boards are class1 laser products. They meet the safety regulations of IEC-60825.

Optical specifications — PowerCage FOX boards, interconnection between transmitter and receiver

Number/type

1 singlemode or 1 multimode fiber optic input and output per FOX board, up to 8 double space boards per PowerCage enclosure

NOTE	For FOX HDMI boards: Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit HDMI video with HDCP content or return data for bidirectional control/communication.

NOTE	Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to return data for bidirectional control and communication.

Connectors

2 bidirectional LC connectors per FOX board

Operating distance

Singlemode

30 km (18.75 miles) with singlemode (SM) cables with a SM board

Multimode

300 m (985') with 62.5 μm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 μm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 μm OM3/OM4 2000 MHz bandwidth laser optimized MM cable and a MM board

NOTE	Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM), 1310 nm for singlemode (SM)

Transmission power, singlemode or multimode

-5 dBm, typical

Maximum receiver sensitivity

Singlemode

-18 dBm, typical

Multimode

-12 dBm, typical

Optical loss budget

Singlemode

13 dB, maximum

Multimode

7 dB, maximum

Maximum channel data rate

PowerCage FOX AV boards

2.125 Gbps

Other PowerCage FOX boards

4.25 Gbps

Video — PowerCage FOX Tx/Rx VGA

NOTE	For PowerCage FOXVGA boards, the analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog video in the receiver.

Signal type

VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs

Gain

Unity

Pixel data bit depth

8 bits per channel, 3 channels (R, G, B)

Maximum resolution

640x480 to 1600x1200 or 480p,576p, 720p,1080i, 1080p @ 60 Hz pixel for pixel; higher resolutions up to 1920x1200 @ 60 Hz, undersampled

Video input — PowerCage FOX Tx VGA

Number/signal type

1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs

Connector

1 female 15-pin HD

Nominal levels

0.7 Vp-p for RGB

Minimum/maximum levels

Analog: 0.3 V to 0.75 Vp-p with no offset, terminated

Impedance

75 ohms

Horizontal frequency

24 kHz to 100 kHz

Vertical frequency

40 Hz to 120 Hz

Return loss

>40 dB @ 5 MHz

Video output — PowerCage FOX Rx VGA

Number/signal type

With input from a FOXBOX Tx VGA or a FOX 500 Tx:
1 VGA-UXGA RGBHV, RGsB (follows input or can be set by user)
With input from a FOXBOX Tx VGA/YUV:
1 VGA-UXGA RGBHV, component video (bi- or tri-level YUV, 480p, 576p, 720p, 1080i, 1080p)

Connector

1 female 15-pin HD

Nominal levels

1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels

0.3 V to 0.75 Vp-p, terminated

Impedance

75 ohms

Return loss

>30 dB @ 5 MHz

DC offset

±5 mV with input at 0 offset

Video delay

1-2 frames

Sync — PowerCage FOX Tx/Rx VGA

Input type

RGBHV, RGBS, RGsB, RsGsBs

Output type

RGBHV, RGsB (follows input or can be set by user)

Input level

2.5 V to 5.0 Vp-p

Output level

TTL: 5.0 Vp-p, unterminated, on HV, for RGBHV, RGBS
0.3 Vp-p for component video (bi-level sync) or for Gs (SOG)
0.6 Vp-p for component video (tri-level sync)

Input impedance

10k ohms

Output impedance

75 ohms

Polarity

Positive or negative (follows input or can be set by user)

Video — PowerCage FOX Tx DVI, PowerCage FOX Tx/Rx DVI Plus

Resolution range

PowerCage FOX Tx DVI

640x480 to 1600x1200 or 480p,576p, 720p,1080i, 1080p @ 60 Hz pixel for pixel; higher resolutions up to 1920x1200 @ 60 Hz, undersampled

PowerCage FOX Tx/Rx DVI Plus

640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i,
1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K(2048x1080) @ 60 Hz, undersampled

Format

RGB

Standards

DVI 1.0, HDMI

Video input — PowerCage FOX Tx DVI, PowerCage FOX Tx DVI Plus

Number/signal type

1 single link DVI-D (or HDMI*)

Connector

1 female DVI-I

NOTE

*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. The PowerCage FOX DVI and DVI Plus boards can be used to distribute HDMI signals if you use a DVI-to-HDMI adapter. However, when using HDMI signals, these units do not transmit audio and CEC signals.
These boards do not support transmission of DVI signals with High-bandwidth Digital Content Protection (HDCP).

Video output — PowerCage FOX Rx DVI Plus

Number/signal type

1 single link DVI-D (or HDMI*)

Connector

1 female DVI-I

Nominal level

0.8 Vp-p

Video delay

1-2 frames

Video — PowerCage FOX 3G HD-SDI

NOTE	The PowerCage FOX 3G HD-SDI is a transceiver that can function as a transmitter or as a receiver. Two units are required for a transmitter-receiver system with one fiber optic cable linking the two units.

Signal type

HD-SDI, SDI, and 3G-SDI digital video signals

Gain

Unity

Resolution

8 or 10 bits, automatic

Data rates

270 Mbps, 1.485 Gbps, 2.970 Gbps

Operation standards

SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120

Auto data rate lock

Yes

Video input — PowerCage FOX 3G HD-SDI transmitter

Number/signal type

1 single link SDI, HD-SDI, or 3G-SDI digital component video

Connectors

1 female BNC

Data rates

19 Mbps to 2.97 Gbps

Nominal level

0.8 Vp-p

Minimum/maximum levels

0.5 V to 1 Vp-p with no offset

Impedance

75 ohms

Return loss

≥15 dB @ 5 MHz to 1.5 GHz
≥10 dB @ 1.5 GHz to 3 GHz

DC offset (max. allowable)

5 V

Input coupling

AC

Input cable equalization

Automatic for up to -30 dB of cable loss

HD-SDI

120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cable

SDI

150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — PowerCage FOX 3G HD-SDI receiver

Number/signal type

2 single link SDI, HD-SDI, or 3G-SDI digital component video

Connectors

2 female BNC

Re-clocking

Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for unrecognized rates

Nominal level

0.8 Vp-p

Minimum/maximum levels

0.5 V to 1.0 Vp-p

Impedance

75 ohms

Return loss

>25 dB @ 100 MHz

DC offset

±5 mV with input at 0 offset

Video — PowerCage FOX Tx/Rx AV

NOTE	For PowerCage FOXAV boards, the analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog video in the receiver.

Gain

Unity

Standards

Input

NTSC 3.58, NTSC 4.43, PAL, SECAM, autodetected

Output

NTSC 3.58, PAL (follows vertical rate)

Decoder type

Adaptive 2D, digital comb filter

Video input — PowerCage FOX Tx AV

Number/signal type

1 component (Y, R-Y, B-Y), S-video, composite video

Connectors

1 x 3 female BNC or 1 female 4-pin mini DIN for S-video

Nominal levels

1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for R-Y, B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

Analog: 0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Return loss

>30 dB for Y/VID, B-Y/C, R-Y @ 5 MHz

Input coupling

AC

Video output — PowerCage FOX Rx AV

Number/signal type

1 component (Y, R-Y, B-Y) video, S-video, composite video

Connectors

1 x 3 female BNC or 1 female 4-pin mini DIN for S-video

Nominal levels

1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for R-Y, B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.5 Vp-p

Impedance

75 ohms

Return loss

>40 dB @ 5 MHz

DC offset

+350mV, maximum, with input at 0 offset

Video delay

1-2 frames

Video — PowerCage FOX Tx/Rx HDMI

NOTE	Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input and output.

Maximum data rate

4.25 Gbps

Maximum pixel clock

165 MHz

Maximum resolution

640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i,
1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K(2048x1080) @ 60 Hz, undersampled

Formats

RGB and YCbCr digital video

Standards

DVI 1.0, HDMI, HDCP 1.1, CEA-861E

Video input — PowerCage FOX Tx HDMI

Number/signal type

1 single link HDMI

Connectors

1 female 19-pin HDMI type A

Video output — PowerCage FOX Rx HDMI

Number/signal type

1 single link HDMI

Connectors

1 female 19-pin HDMI type A

Video processing — PowerCage FOX SR HDMI

Digital sampling

24 bit, 8 bits per color, 165 MHz standard

Colors

16.78 million

Video output — PowerCage FOX SR HDMI

NOTE	Appropriate HDMI to DVI-D cables or adapters are required for DVI signal output.

Number/signal type

1 single link HDMI (HDCP compliant)

Connectors

1 female HDMI type A

Nominal level

0.8 Vp-p

Video delay

1-2 frames

Scaled resolution

640x480 ^6,8,9 , 800x600 ^6,8,9 , 852x480 ^6,8,9 , 1024x768 ^6,8,9 , 1024x852 ^6,8,9 , 1024x1024 ^6,8,9 , 1280x768 ^6,8,9 , 1280x800 ^6,8,9 , 1280x1024 ^6,8,9 , 1360x765 ^6,8,9 , 1360x768 ^6,8,9 , 1365x768 ^6,8,9 , 1365x1024 ^6,8,9 , 1366x768 ^6,8,9 , 1400x1050 ^6,8 , 1440x900 ^6,8,9 , 1600x1200 ^6,8 , 1680x1050 ^6,8 , 1920x1200 ^6,8
HDTV: 480p ^7,8 , 576p ⁶ , 720p ^3,4,5,6,7,8 , 1080i ^6,7,8 , 1080p ^{1,2,3,4,5,6,7,8} , 2048x1080 ^{1,2,3,4,5,6,7,8}

¹ = 23.98Hz, ² = 24Hz, ³ = 25Hz, ⁴ = 29.97Hz, ⁵ = 30Hz, ⁶ =50Hz, ⁷ =59.94Hz, ⁸ =60Hz, ⁹ =75Hz

Video — PowerCage MTP T 15HD RSA, PowerCage MTPR15HDRSASEQ

Gain

Unity

Number/signal type

1 set of proprietary analog signals

Connector

1 female RJ-45

Video input — PowerCage MTP T 15HD RSA

Number/signal type

1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (YUVi or YUVp/HDTV), S-video, or composite video

Connector

1 female 15-pin HD

Nominal levels

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.45 Vp-p

Impedance

75 ohms

Horizontal frequency

15 kHz to 130 kHz

Vertical frequency

30 Hz to 150 Hz

Return loss

<-30 dB @ 5 MHz

DC offset (max. allowable)

250 mV

Video output — PowerCage MTP R 15HD RSA SEQ

Number/signal type

1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (YUVi or YUVp/HDTV), S-video, or composite video

Connector

1 female 15-pin HD

Nominal levels

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.45 Vp-p

Impedance

75 ohms

Return loss

<-30 dB @ 5 MHz

DC offset

<±35 mV with input at 0 offset

Skew compensation

62 ns

Maximum resolution

Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'

NOTE	Refer to the user guide for the maximum distances recommended for specific resolutions.

Sync — PowerCage MTP T 15HD RSA, PowerCage MTPR15HDRSASEQ

Input/output type

RGBHV, RGBS, RGsB, RsGsBs

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Input level (transmitter)

3.5 V to 5.5 Vp-p, unterminated

Output level (receiver)

4.0 V to 5.0 Vp-p, unterminated

Input impedance (transmitter)

573 ohms ±5%

Output impedance (receiver)

110 ohms

Polarity

Transmitter

Positive or negative (follows input polarity)

Receiver

Positive or negative (switch-selectable)

Video — PowerCage MTP T AV, PowerCage MTP R AV

Gain

Unity

Differential phase error

<1.0° at 3.58 MHz and 4.43 MHz

Differential gain error

<1.0% at 3.58 MHz and 4.43 MHz

Video input — PowerCage MTP T AV

Number/signal type

1 S-video or composite video

Connectors

2 female BNC

Nominal level

1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Return loss

<-30 dB, DC @ 10 MHz

DC offset (max. allowable)

250 mV

Video output — PowerCage MTP R AV

Number/signal type

1 S-video or composite video

Connectors

2 female BNC

Nominal level

1 V p-p for Y of S-video and for composite video
0.3 V p-p for C of S-video

Minimum/maximum level

0.3 V to 1.5 Vp-p

Impedance

75 ohms

Return loss

<-35 dB @ 5 MHz

DC offset

±20 mV with input at 0 offset

Sync — PowerCage MTP T AV, PowerCage MTP R AV

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Audio — PowerCageFOXTx/RxVGA, PowerCageFOXTxDVI, PowerCageFOXTx/RxDVIPlus, PowerCageFOXTx/RxAV, PowerCageFOXTx/RxHDMI, PowerCage FOX SR HDMI

NOTE	In PowerCage FOX boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.

Gain

Range

Adjustable, -18 dB to +10 dB

Default

Unbalanced output: -6 dB; balanced output: 0 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

VGA, DVI, HDMI, SR HDMI boards

0.10% @ 1 kHz at nominal level

AV boards

0.15% @ 1 kHz at nominal level

S/N

>80 dB at maximum output (unweighted)

CMRR

65 dB @ 20 Hz to 20 kHz

Audio bits per sample

18 bits per channel, 2 channels (L, R)

Sampling rate

48 kHz

Audio — PowerCageFOXAEX104

NOTE	In PowerCage FOX boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.

NOTE	The PowerCageFOXAEX104 board is not compatible with the Extron FOX3GHD-SDI extender or the FOX3GDVC signal converter.

Gain

Unbalanced output: -6 dB; balanced output (default): 0 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.10% @ 1 kHz at nominal level

S/N

>80 dB at maximum output (unweighted)

Audio bits per sample

18 bits per channel, 2 channels (L, R)

Sampling rate

48 kHz

Audio input — PowerCage FOX Tx VGA, PowerCage FOX Tx DVI, PowerCage FOXTxDVIPlus, PowerCage FOX Tx AV, PowerCage FOXTxHDMI

Number/signal type

HDMI boards

1 stereo, unbalanced or
2 mono, unbalanced

VGA, DVI, DVI Plus, and AV boards

1 stereo, balanced/unbalanced or
2 mono, balanced/unbalanced

Connectors

HDMI boards

(1) 3.5 mm mini stereo jack

VGA, DVI, DVI Plus, and AV boards

(1) 3.5 mm captive screw connector, 5 pole

Impedance

≥10k ohms unbalanced, ≥20k ohms balanced

Nominal level

HDMI boards

-10 dBV (316 mVrms)

All other FOX boards

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

AV boards

+17 dBV, unbalanced at 1% THD+N

VGA, DVI, DVI Plus, and HDMI boards

+8.9 dBV, unbalanced at 1% THD+N

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — PowerCage FOX Rx VGA, PowerCage FOX Rx DVI Plus, PowerCageFOXRxAV, PowerCageFOXRxHDMI, PowerCage FOX SR HDMI, PowerCage FOXAEX104

Number/signal type

AEX 104 boards

4 stereo, balanced/unbalanced or
8 mono, balanced/unbalanced

All other FOX boards

1 stereo, balanced/unbalanced or
2 mono, balanced/unbalanced

Connectors

AEX 104 boards

(4) 3.5 mm captive screw connectors, 5 pole

All other FOX boards

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Nominal level

HDMI boards

-10 dBV (316 mVrms)

All other FOX boards

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level (Hi-Z)

VGA and DVI Plus boards

+7.6 dBu, unbalanced at 1% THD+N

AV boards

>+19 dBu, unbalanced at 1% THD+N

HDMI and AEX 104 boards

>+11.0 dBu, balanced at 1% THD+N

Maximum level (600 ohm)

VGA and DVI boards

>+6.3 dBu, unbalanced at 1% THD+N

AV boards

>+15 dBm, unbalanced at 1% THD+N

HDMI and AEX 104 boards

>+10.0 dBu, balanced at 1% THD+N

Audio delay

1.5 frames

Audio — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ, PowerCage MTP T AV, PowerCage MTP R AV

Number/signal type

1 set of proprietary analog signals

Connector

1 female RJ-45

Gain

Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±1 dB

THD + Noise

0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level

S/N

>70 dB at maximum output (unweighted)

Stereo channel separation

>60 dB @ 1 kHz

CMRR

>43 dB @ 20 Hz to 20 kHz

Audio input — PowerCage MTP T 15HD RSA, PowerCage MTP T AV

Number/signal type

PowerCage MTP T 15HD RSA

1 stereo, unbalanced

PowerCage MTP T AV

1 stereo, balanced/unbalanced

Connector

(1) 3.5 mm captive screw connector, 5 pole

Impedance

PowerCage MTP T 15HD RSA

>10k ohms, unbalanced

PowerCage MTP T AV

>10k ohms, unbalanced; >20k ohms, balanced; AC coupled

Nominal levels

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

+18 dBu, (unbalanced) at 1% THD+N

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — PowerCage MTP R 15HD RSA SEQ, PowerCage MTP R AV

Number/signal type

PowerCage MTP R 15HD RSA SEQ

1 mono, balanced/unbalanced

PowerCage MTP R AV

2 mono, balanced/unbalanced

Connector

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±1 dB channel to channel

Nominal levels

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

+18 dBu, unbalanced at 1% THD+N

Control/remote

NOTE	PowerCage MTP AV Series boards and PowerCage FOX AEX boardsdo not have any RS-232 communication. PowerCage MTP 15HD Series boards have only pass-through RS-232 communication.

Serial control ports

Enclosure

1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel)

PowerCage FOX boards

Control

1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port)

Pass-through

1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used, "RS-232 Over Fiber")

PowerCage MTP 15HD boards

External device; pass-through, uni- or bidirectional
Input/output: 1 set of proprietary signals on a female RJ-45 jack
Output/input: 1 RS-232 via 3 poles of a 3.5 mm captive screw connector (3 pole for transmitter, 5 pole for receiver)

Baud rate and protocol

PowerCage FOX boards

Control

9600 baud, 8 data bits, 1 stop bit, no parity

Pass-through

9600 to 115,200 baud

PowerCage MTP 15HD boards

Baud rates

Up to 38400 bps at up to 600' (182.9 m)
(Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)

Protocol

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
Defaults: 8 data bits, 1 stop bit, no parity

NOTE	For PowerCage MTP boards, protocol is mirrored between the transmitter and the receiver.

Serial control pin configurations

Captive screw connector

PowerCage FOX boards

1 = Tx, 2 = Rx, 3 = GND

PowerCage MTP 15HD boards

Transmitter: 1 = Tx, 2 = Rx, 3 = GND
Receiver: 3 = GND, 4 = Tx, 5 = Rx

Mini stereo jack

RS-232: tip = Tx, ring = Rx, sleeve = GND

Program control

For FOX boards only:
Extron control/configuration program for Windows ^?
Extron Simple Instruction Set (SIS ^? )

General

Recommended cable type

For PowerCage MTP boards: Extron Enhanced Skew-Free ^? AV UTP cable or CAT5/5e/6 (shielded or unshielded)

Power supply

Internal, 1 or 2* (positive-negative), primary and redundant,hot-swappable
100-240 VAC, 50-60 Hz
*A redundant power supply is optional.

Power consumption

System

Enclosure without boards: 12.4 watts

Individual FOX boards

FOX Tx VGA: 5.68 watts
FOX Rx VGA: 6.54 watts
FOX Tx DVI: 5.67 watts
FOX Rx DVI: 5.50 watts
FOX 3G HD-SDI: 1.84 watts
FOX Tx AV: 6.89 watts
FOX Rx AV: 5.57 watts
FOX DVI PlusTx: 5.68 watts
FOX DVI PlusRx: 6.18 watts
FOX Tx HDMI: 6.02 watts
FOX Rx HDMI: 6.02 watts
FOX SR HDMI: 8.8 watts
FOX AEX 104: 7.9 watts

Individual MTP boards

MTP T 15HD RSA: 4.30 watts
MTP R 15HD RSA SEQ:8.38 watts
MTP T AV: 2.69 watts
MTP R AV: 3.92 watts

Power input requirements for boards

12 VDC, 1.0 A, supplied by the PowerCage enclosure

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosure

Thermal dissipation

FOX SR HDMI board

29.8 BTU/hr

FOX AEX 104

27.0 BTU/hr

All other boards

27.6 BTU/hr

Mounting — PowerCage enclosure

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

PowerCage enclosure

5.25" H x 17.0" W x 12.25" D (3U high, full rack wide)
13.3 cm H x 43.2 cm W x31.2 cm D
(Depth excludes connectors on the optional boards. Width excludes rack ears.)

PowerCage FOX boards

Each fits a double slot opening in a PowerCage enclosure.

PowerCage MTP R 15HD RSA SEQ

Each fits a double slot opening in a PowerCage enclosure.

All other boards

Each fits a single slot opening in a PowerCage enclosure.

Product weight

PowerCage enclosure

11.6 lbs (5.3 kg)

PowerCage FOX boards

1.1 lbs (0.5 kg)

PowerCage MTP R 15HD RSA SEQ

1.0 lbs (0.5 kg)

All other boards

0.8 lbs (0.4 kg)

Shipping weight

PowerCage enclosure

13 lbs (6 kg)

Boards

2 lbs (1 kg) each

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Environmental

Complies with the appropriate requirements of RoHS, WEEE.

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.1-121114-D15)

更多愛思創(chuàng )Extron電子產品

查看詳情

產品型號：XTP II CrossPoint 1600-帶 SpeedSwitch 技術的模塊化數字矩陣切換器，尺寸從 4x4 至 16x16 不等

名稱：帶 SpeedSwitch 技術的模塊化數字矩陣切換器，尺寸從 4x4 至 16x16 不等

報價：面議 (在產)

經銷商:愛思創(chuàng )Extron電子
4000.398766、 021-3760 1568
查看詳情

產品型號：XTP R HDMI-HDMI 接收器

名稱：HDMI 接收器

報價：面議 (促銷)

經銷商:愛思創(chuàng )Extron電子
4000.398766、 021-3760 1568
查看詳情

產品型號：XTP SR HDMI-XTP 圖像解析度轉換接收器

名稱：XTP 圖像解析度轉換接收器

報價：面議 (促銷)

經銷商:愛思創(chuàng )Extron電子
4000.398766、 021-3760 1568
查看詳情

產品型號：XTP T HWP 101-用于 HDMI 信號的 XTP 發送器 - Decorator 型墻面板

名稱：用于 HDMI 信號的 XTP 發送器 - Decorator 型墻面板

報價：面議 (促銷)

經銷商:愛思創(chuàng )Extron電子
4000.398766、 021-3760 1568
查看詳情

產品型號：XTP T UWP 302-2 路輸入 XTP 發送器 - 墻面板

名稱：2 路輸入 XTP 發送器 - 墻面板

報價：面議 (促銷)

經銷商:愛思創(chuàng )Extron電子
4000.398766、 021-3760 1568

国产av福利久久精品can动漫|2021精品国产自在现线|亚洲无线观看国产高清|欧洲人妻丰满av无码久久不卡|欧美情侣性视频