我的位置：
- 數字音視工程網/
- 產品中心/
- 產品詳情
愛思創(chuàng )Extron電子-帶 DTP 延長功能的媒體演示切換器-MPS 602
廠家報價：面議
產品狀態：(在產)
帶 DTP 延長功能的媒體演示切換器 MPS 602
產品品牌：
愛思創(chuàng )EXTRON
產品類別：
產品中心
地址：中國上海市松江區茸華路 686 號
電話：4000.398766、 021-3760 1568(聯系就說在DAV音視工程網上看到的)
廠商介紹： 愛思創(chuàng )電子（上海）有限公司（愛思創(chuàng )Extron中國）全球總部位于美國加州，是世界領先的專業視音頻系統集成產品的生產商。愛思創(chuàng )Extron產品主要包括視音頻控制系統、計算機視頻接口、切換器、矩陣切換器、分配放大器、音頻放大器、揚聲器、雙絞線和光纖設備、視頻圖像解析度轉換器、視音頻信號處理器、視音頻流媒... [詳細]
| 經銷商 | 聯系方式 | 價格 |
|---|---|---|
| 愛思創(chuàng )Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
| MPS 602 | |||
| Video — VGA | |||
|---|---|---|---|
| Gain | Unity | ||
| Bandwidth | 170 MHz (-3 dB) | ||
| Crosstalk | -50 dB @ 10 MHz, -30 dB @ 100 MHz | ||
| Video — HDMI and DTP | |||
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Resolution | 1920x1200 @ 60 Hz or 1080p @ 60 Hz, and 2K | ||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI 1.3, HDCP 1.1, CEA-861E | ||
| Video input | |||
| Number/signal type | |||
| VGA inputs | 2 VGA-QXGA, RGBHV, RGBS | ||
| HDMI inputs | 3 HDMI (or single link DVI-D, with appropriate DVI-HDMI adapters) | ||
| DTP input | 1 DTP 330 input | ||
| Connectors | |||
| VGA inputs | 2 female 15-pin HD | ||
| HDMI inputs | 3 female HDMI, type A | ||
| DTP input | 1 RJ-45 female | ||
| Nominal level | |||
| VGA inputs | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | |||
| VGA inputs | Analog 0.3 V to 1.5 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 145 kHz | ||
| Vertical frequency | 30 Hz to 170 Hz | ||
| Return loss | <-40 dB @ 5 MHz | ||
| Video output | |||
| Number/signal type | |||
| Local VGA output | 1 VGA-QXGA, RGBHV, RGBS | ||
| HDMI outputs | 1 HDMI (or single link DVI-D) | ||
| DTP output | 1 DTP 330 output | ||
| DTP signal | |||
| Transmission distance | up to 330' (100 m) usingshieldedtwisted pair (STP) or XTP DTP 24cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
| Connectors | |||
| Local VGA output | 1 female 15-pin HD | ||
| HDMI outputs | 1 female HDMI type A | ||
| DTP output | 1 RJ-45 jack | ||
|
|||
| Nominal level | |||
| VGA outputs | 0.7 Vp-p for RGB | ||
| Minimum/maximum levels | |||
| VGA outputs | Analog, 0.3 Vp-p to 1.5 Vp-p | ||
| Impedance | 75 ohms | ||
| Return loss (VGA output) | <-40 dB @ 5 MHz | ||
| DC offset (max. allowable, VGA output) | ±5 mV with input at 0 offset | ||
| Sync — VGA Inputs Only | |||
| Input type | RGBHV, RGBS | ||
| Local VGA output | RGBHV, RGBS | ||
| Input level | 1.9 Vp-p to 5.0 Vp-p | ||
| Output level | TTL: 5.0 Vp-p (unterminated) for RGBHV, RGBS | ||
| Input impedance | 510 ohms | ||
| Output impedance | 75 ohms | ||
| Max. input voltage | 5.0 Vp-p | ||
| Max. propagation delay | 30 ns | ||
| Max. rise/fall time | 4.2 ns | ||
| Polarity | Positive or negative (follows input) | ||
| Audio — individual audio groups (VGA, HDMI) | |||
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | |||
| MPS 602 | 0.01% @ 1 kHz at nominal level | ||
| MPS 602 SA/MA | <0.1% @ 1 kHz 3 dB below clipping | ||
| S/N | |||
| MPS 602 | >90 dB at maximum output (unweighted) | ||
| MPS 602 SA/MA | >90 dB 20 Hz to 20 kHz, unweighted | ||
| Crosstalk | <-72 dB @ 1 kHz or below, <-45 dB @20 kHz | ||
| Stereo channel separation | >80 dB @ 1 kHz | ||
| CMRR | >60 dB @ 1 kHz | ||
| Audio input — (VGA,and HDMIvideo) | |||
| Number/signal type | |||
| VGA inputs | 2 stereo, unbalanced/balanced | ||
| HDMI inputs | 3 stereo, unbalanced/unbalanced, or 3 embedded digital audio from HDMI |
||
| DTP input | 1 stereo, unbalanced analog 1 embedded digital audio from DTP |
||
| Embedded digital audio source formats | 2-ch PCM | ||
| Connectors | |||
| VGA inputs | (2) 3.5 mm captive screw connectors, 5-pole | ||
| HDMI inputs | (3) 3.5 mm captive screw connectors, 5-pole 3 female HDMI type A |
||
| DTP input | 1female RJ-45 connector | ||
| Input impedance | >10k ohms unbalanced, 20k ohms balanced | ||
| Nominal level | +4 dBu balanced,-10 dBV unbalanced, configurable | ||
| Maximum level | +15.2 dBu, balanced, +9.2 dBu unbalanced | ||
| CMRR | >60 dB typical @ 1 kHz | ||
| Input gain adjustment | -18 dB to +24 dB, adjustable per input | ||
|
|||
| Audio output | |||
| Number/signal type | 2 stereo, balanced/unbalanced (fixed and variable outputs) 1 DTP analog audio and 1 embedded digital audio on DTP signal 1 embedded digital audio on HDMI |
||
| Connectors | (2) 3.5 mm captive screw connectors, 5-pole 1 RJ-45 1 female HDMI type A |
||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Gain error | ±0.5 dB channel to channel | ||
| Nominal level when the main volume is set to default | -2 dBu (632 mVrms) balanced output | ||
| Maximum level | +15.2 dBu balanced, +9.2 dBV unbalanced | ||
| Talk-over (ducking) response time (typical) | |||
| Attack time | Instant | ||
| Release delay | 5 seconds | ||
| Release time | 1 second | ||
| Ducking level | 0 dB to 30 dB, adjustable; default = +6 dB | ||
| Audio output — power amplifier | |||
| Number/signal type | |||
| MPS 602 SA | 1 stereo (default) or 2 mono, 2 channels total | ||
| MPS 602 MA | 1 mono, 70V line | ||
| Connector | |||
| MPS 602 SA | (1) 5 mm screw lock captive screw connector, 4-pole | ||
| MPS 602 MA | (1) 5 mm screw lock captive screw connector, 2-pole | ||
| Load impedance | |||
| MPS 602 SA | 4 ohms minimum | ||
| MPS 602 MA | 50 ohms minimum | ||
| Output power | |||
| MPS 602 SA | 25 watts rms per channel, 8 ohms, 1 kHz, 0.1% THD 50 watts rms per channel,4 ohms, 1 kHz, 0.1% THD |
||
| MPS 602 MA | 100 watts rms 70V, 1 kHz, 0.1% THD | ||
| THD + Noise | 0.1% @ 1 kHz, 3 dB below clipping | ||
| Amplifier type | Class D | ||
| Mic/line input | |||
| Number/signal type | 1 mono balanced/unbalanced | ||
| Connector | (1) 3.5 mm captive screw connector | ||
| Impedance | 10k ohms unbalanced, 20k ohms balanced | ||
| Nominal level | -60 dBV (1 mV), +4 dBu, -10 dBV, adjustable | ||
| Equivalent input noise | <-117 dBV (1.4 uVrms) when gain is set to 40 dB | ||
| Maximum level | +12 dBV (2 Vrms) when gain is set to 0 dB | ||
| CMRR | >60 dB typical @ 1 kHz | ||
| Input gain adjustment | -18 dB to +60 dB, 1 dB steps, adjustable per input | ||
| Microphone volume range | -66 dB to +12 dB | ||
| Microphone DC power | +48 VDC + 10% phantom power, can be turned on or off | ||
|
|||
| Communications — switcher | |||
| Serial control port | 1 RS-232, 3.5 mm captive screw connector, 3-pole, rear panel | ||
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Serial control pin configuration | 2 = Tx, 3 = Rx, 5 = Gnd | ||
| USB control ports | 1 front panel female mini USB B | ||
| USB standards | USB 2.0, high speed | ||
| Program control | Extron Simple Instruction Set (SIS ? ), Extron Product Configuration Software (PCS) | ||
| Communications — external device (pass-through, unidirectional or bidirectional) | |||
|
|||
| Quantity/type | (2) RS-232 and IR via (2) 3.5 mm captive screw connectors, 5-pole | ||
| Serial control pass-through ports | (2) bidirectional RS-232 | ||
| Input/DTP Tx | (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with IR port) | ||
| Output/DTP Rx | (1) RS-232 (1)3.5 mm 5-pole captive screw connector (shared with IR port) | ||
| Baud rates | 300 to115200 baud | ||
| Protocol | 8 or 7 data bits, 1 or 2 stop bits, no parity (default), even or odd parity | ||
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
| IR pass-through control ports | 2 bidirectional TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz |
||
| Input/DTP Tx | (1) RS-232 (1) 3.5 mm captive screw connector,5-pole (shared with RS-232 port) | ||
| Output/DTP Rx | (1) RS-232 (1) 3.5 mm captive screw connector, 5-pole (shared with RS-232 port) | ||
| IR control pin configuration | 3 = Gnd, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | Internal Input: 100-240 VAC, 50-60 Hz |
||
| Power consumption | |||
| MPS 602 | Full load, 22 W | ||
| MPS 602 SA | Full load, amp at 1/8 power: 44 W | ||
| MPS 602 MA | Full load, amp at 1/8 power: 44 W | ||
| Remote power capability | Supports up to two endpoints (one DTP Tx, one DTP Rx) | ||
| Temperature/humidity | Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on top and sides | ||
| Power consumption | 22 watts | ||
| Thermal dissipation | |||
| MPS 602 | Full load, 69 BTU/hr | ||
| MPS 602 SA | Full load, amp at 1/8 power: 102 BTU/hr | ||
| MPS 602 MA | Full load, amp at 1/8 power: 102 BTU/hr | ||
| Mounting | |||
| Rack mount | Yes, with included brackets | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.75" H x 17.4" W x 8.5" D (1U high, full rack wide) 4.4 cm H x 43.2 cm W x 21.6 cm D (Depth excludes connectors and knobs. Width excludes rack ears.) |
||
| Product weight | 7.0 lbs (3.2 kg) | ||
| Shipping weight | 10 lbs (5 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, ICES, FCC Class A, VCCI, ICES | ||
| Environmental | Complies with the appropriate requirements of RoHS, WEEE | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
| (8.1-070115-D8) | |||
